So... What is it?

Us brewers love big punchy IPA's! But what if you want a couple on a school night? Dont knock down the flavour, just knock down the ABV! This is a full flavoured, full bodied session IPA at just 3.5% so now you can enjoy an old school west coast punchy IPA, packed full of resinous, piney and citrus character AND still be able to wake up and go to work the next day!

‍

Batch Size & Stats

• 38L (2 19L corny kegs) / 10 gal finished beer
• 47L (12.4 gal) wort 

• For a smaller 19L (5 gal) batch size simply half the ingredients of this recipe

• Starting gravity – 1.035
• Final gravity 1.008
• ABV – 3.5%
• IBU - 57
• Colour - 15 EBC
• Mash Efficiency - 89%

Brewfather link

‍

What ingredients?

Water 

With sparging

• 30.5L (8 gal) Mash temp 70°C (158°F) 1 hour. use our calculator to determine your strike water temp

• 30.5L (8 gal) sparge water at 78°C (172°F)

Without sparging

• 60L (15.8 gal) Mash temp 70°C (158°F) 1 hour. use our calculator to determine your strike water temp

‍

Malts: 6.13kg (13.5 lb)

• Pale Ale Malt – 5.119kg (11.3 lb) - 83.5%
• Light Munich Malt - 399g (0.88 lb) - 6.5%
• Gladfield Gladiator Malt (Dextrin Malt) - 307g (10.8 oz) - 5%
• Gladfield Medium Crystal Malt - 307g (10.8 oz) - 5%

‍

‍

Hops (606g / 21.4 oz) & whirlfloc tablets  

Fuggles (5.3% AA)

• 10g (0.35 oz) - 3 IBU's - 60 minutes left in the boil

Centennial (8.7% AA)

• 57g (2 oz) - 8 IBU's) - 5 minutes left in the boil
• 57g (2 oz) - 3 IBU's) - 20 min whirlpool @ 75°C (167°F)
• 85g (3 oz) - Dry Hop day 7

Lupomax Citra (18.5% AA)

• 57g (2 oz) - 17 IBU's) - 5 minutes left in the boil
• 57g (2 oz) - 6 IBU's) - 20 min whirlpool @ 75°C (167°F)
• 85g (3 oz) - Dry Hop day 7

Lupomax Mosaic (16% AA)

• 57g (2 oz) - 15 IBU's) - 5 minutes left in the boil
• 57g (2 oz) - 5 IBU's) - 20 min whirlpool @ 75°C (167°F)
• 85g (3 oz) - Dry Hop day 7

Whirlfloc tablets 

• 1.5g (0.052 oz) / 2 tablets – 15 minutes left in the boil

‍

Yeast options & fermentation temperatures

• 23g Lallemand (LalBrew) Verdant IPA – ferment at 20°C (68 F)
• Any other ale or IPA yeast of choice

‍

Water Profile

• Ca²⁺87
• ‍^‍Mg²⁺ 5
• ‍Na⁺ 15
• ‍Cl^- 67
• ‍^‍SO₄^2- 136
• ‍^‍HCO₃^- 57

Step by step process

Step 1 – Milling

• Mill grains to medium crush (set mill rollers to a gap of approx. 1.05mm / 0.041 inches)
• Just keep in mind roller gap settings are not universal so as you brew more batches you will find the ideal crush size for your setup
• Alternatively if you don’t have a grain mill you can order your grains crushed from most homebrew stores, both online and in person

‍

Step 2 – Mashing 

• Mash for 60 minutes at 70°C (158°F) 

• Set your strike water to a few degrees above the target mash temperature, you can use our calculator to determine what your strike temperature should be

• ensure you mix in the grains thoroughly with a mash paddle to prevent dough balls from forming (big spoons, spatulas or whisks will also work)   

• its easier to mash the grains and prevent dough balls if you add a little grain at a time, mix, add more grain and repeat until all the grains are mixed

• if you don’t have a mash tun with heating then ensure after you have finished mixing the grains in to insulate your mash tun (thick neoprene or heavy blankets both work well)

‍

Step 3 (optional) – Sparging

• if your setup has the capability to sparge then do so with 30L (7.9 gal) sparge water at 78°C (172°F)
• if you are not sparging and using a BIAB (brew in a bag) method then remove grains from mash tun and twist and squeeze the bag to get as much liquid out of the grains as possible
• as you start sparging (or straining your BIAB bag) begin raising the temperature of your wort to a boil

‍

Step 4 – Boiling

• once your wort begins to boil start a timer for a 60-minute boil and add your bittering hops, 10g (0.35 oz) of Fuggles
• at 15 minutes left in the boil add 2 whirlfloc tablets
• With 5 minutes left in the boil add 58g (2 oz) each of Fuggles, Centennial, Lupomax Citra & Lupomax Mosaic

‍

Step 5 – Whirlpooling / cooling

• After 1 hour of boiling cool the wort down to 75°C (167°F) and add your whirlpool hops for a 20 min whirlpool
• After 20 mins of whirlpooling begin chilling wort down to yeast pitching temperature
• once you’ve reached yeast pitching temperature take an original gravity reading of your wort

‍

Step 6 – Yeast Pitching

• It is best to make a yeast starter before beginning your brew day (ideally 1 day before) to ensure your yeast are as active and healthy as possible before pitching, but not completely necessary – you could also just rehydrate yeast 30 minutes before pitching.
• Pitch yeast in wort a degree or two higher than the target fermentation temperature to help yeast take off more aggressively 

• To make a yeast starter you can use either:

• DME (dry malt extract) at a ratio of approx. 100g per 1L water (3.5 oz per 33 fluid ounces) for gravity of approx. 1.040 
• some unfermented wort kept cold and sanitary from a previous brew day
• 70g of table sugar per 1L water (2.5 oz per 33 fluid ounces) – however, it is best to use malt sugar (wort / DME) whenever possible to reduce the chance of shocking the yeast with a different food source from starter to wort pitching

• To rehydrate yeast

• Add yeast to approx. 10 times as much room temperature water as the weight of the yeast e.g. 10g yeast in 100 ml water (0.35 oz yeast in 3.5 fluid ounces water)

‍

Step 7 – Fermentation & dry hopping 

• Allow yeast to ferment over the next two weeks (aprox)
• If you have a temperature-controlled system keep the fermenter temperature to the recommended fermentation temperature for each yeast strain (stated in the yeast ingredients section above)
• Monitor the fermentation activity over the first 10-12 days by the bubbling of the blow-off tube/airlock of your fermenter, as the bubbling slows down (roughly around day 7) take a gravity reading. When the gravity reaches around 1.010 raise the temperature of your fermenter by 1-2 degrees for 2-3 days for a diacetyl rest (if you don’t have temperature control don’t worry about this step, it's not the end of the world!)
• At the same time as starting your Diacetyl rest, add your dry hops, 85g (3 oz) each of Centennial, Lupomax Citra & Lupomax Mosaic

• It's important to note that fermentation times will vary based on your circumstances like temperature, amount of yeast pitched, the healthiness of yeast, the gravity of the wort, pH, etc. so don’t stress be patient and know that these times are just a rough guide

• On day 2 of the diacetyl rest (once gravity reaches roughly 1.009) & gravity is the same 2 days in a row move onto cold crashing! (If you can’t / don’t want to cold crash go straight to kegging/bottling your beer!)

‍

Step 8 (optional) – Cold crashing 

• begin cold crashing your fermenter (bring the temperature of your fermenter down to as close to 0°C (32°F) as possible, for 2 days to a week depending on how patient you are
• If you don’t have a temp-controlled fermenter, you can cold crash by putting your fermenter in a fridge or temp-controlled chest freezer
• After you have finished cold crashing it's time to keg/bottle your beer! If you are bottling your beer from the fermenter uncarbonated remember to add about 5-7 grams (0.17 - 0.24 oz) of priming sugar to your bottles to carbonate your beer.