Reece's Pieces Peanut Butter Porter

So... What is it?

The Porter is a dark beer originating from London in the early 18th century, named after the working-class porters who favored it. Historically, porters were one of the first mass-produced beers and evolved over time, leading to variations like the stout, which was originally a stronger version of the porter. While porters feature chocolate, caramel and coffee flavours they tend to be smoother and less bitter than stouts, which often have a more robust, bitter profile.

‍

What's ours like?

This one takes all the best aspects of the old school porter, with a fantastic chocolate and peanut butter filled twist! Working peanut butter flavours into beer is notoriously difficult, and we learnt that first hand with this experience! Our first batch was brilliant right up until we dry hopped the PB Fit powder, so dont do that! In our second batch we dissolved the powder into the beer at the end of the boil and oh boy did it deliver! The second version came out as an 8.3% peanut butter bomb! Creamy flavours of malty nuttiness and chocolate layer with the PB beautifully making this just so damn addictive! I am certainly going to experiment with peanut butter more in future! Happy Halloween!

‍

‍

Batch Size & Stats

First batch (on camera failed batch!)

• 38L (2 19L corny kegs) / 10 gal finished beer
• 47L (12.4 gal) wort
• For a smaller 19L (5 gal) batch size simply half the ingredients of this recipe
• Starting gravity – 1.067
• Final gravity 1.016
• ABV – 6.7%
• IBU - 25
• Colour - 74.5 EBC
• Mash Efficiency - 73%

Brewfather link - 1st version (on camera)

second batch (Off Camera re-brew)

• 19L / 5 gal finished beer
• 25L (6.6 gal) wort
• For a smaller 19L (5 gal) batch size simply half the ingredients of this recipe
• Starting gravity – 1.081
• Final gravity 1.018
• ABV – 8.3%
• IBU - 19
• Colour - 77 EBC
• Mash Efficiency - 78%

‍Brewfather link - 2nd version (brewed off camera) - This recipe was better!!

‍

What ingredients?

Water 

With sparging

• 37L (9.77 gal) for a 68°C (154.4°F) mash  (you can use our strike water calculator to find your ideal strike temp)
• 30L (7.9 gal) sparge water at 78°C (172°F) - fermenter topped up with 4L (1 gal) post boil to reduce OG

Without sparging

• 55L (14.5 gal) for a 68°C (154.4°F) mash  (you can use our strike water calculator to find your ideal strike temp)

Malts: Total 13.01 kg / 28.68 lb

• 9.05 kg / 20 lb (69.6%) — Ale Malt
• 1.48 kg / 3.3 lb(11.4%) — Dark Munich Malt
• 990 g / 2.18lb (7.6%) — Light Chocolate Malt
• 870 g / 1.92 lb(6.7%) — Medium Crystal 240
• 620 g / 1.37lb (4.8%) — Gladiator Malt (Dextrin malt)

Adjuncts

• 2.77 kg (6.1 lb) — reeces peices peanut butter cups 20min left in boil step
• 430g (0.95 lb) — PB Fit Peanut Butter Powder (changed from video, i recommend dissolving this in hot wort towards the end of boil and adding it in just before flameout)

‍

Hops & whirlfloc tablets  

Northern Brewer

• 28g (10 IBU) (1 oz) – 60 mins
• 50g (9 IBU) (1.76 oz) – 15 mins

Fuggles

• 50g (5 IBU) (1.76 oz) – 15 mins

‍

Whirlfloc tablets 

• 1.5g (0.052 oz) / 2 tablets – 15 minutes left in the boil

‍

Yeast options & fermentation temperatures

• 20g (0.7 oz) Lallemand (LalBrew) Nottingham Yeast – ferment at 18°C / 64.4°F

• 23g (0.8 oz) Aus-05– ferment at 18°C / 64.4°F
• 23g (0.8 oz) US-05 – ferment at 18°C / 64.4°F
• 23g (0.8 oz) S-04 – ferment at 18°C / 64.4°F

Water Profile

• Ca²⁺85
• ‍^‍Mg²⁺ 9
• ‍Na⁺ 26
• ‍Cl^- 100
• ‍^‍SO₄^2- 50
• ‍^‍HCO₃^- 154

‍

Step by step process

Step 1 – Milling

• Mill grains to medium crush (set mill rollers to a gap of approx. 1.00mm / 0.039 inches)
• Just keep in mind roller gap settings are not universal so as you brew more batches you will find the ideal crush size for your setup
• Alternatively if you don’t have a grain mill you can order your grains crushed from most homebrew stores, both online and in person

Step 2 – Mashing 

• Mash for 60 mins at 68°C (154.4°F)

• Set your strike water to a few degrees above the target mash temperature, you can use our calculator to determine what your strike temperature should be

• ensure you mix in the grains thoroughly with a mash paddle to prevent dough balls from forming (big spoons, spatulas or whisks will also work)   

• its easier to mash the grains and prevent dough balls if you add a little grain at a time, mix, add more grain and repeat until all the grains are mixed

• if you don’t have a mash tun with heating then ensure after you have finished mixing the grains in to insulate your mash tun (thick neoprene or heavy blankets both work well)
• after 60 minutes of mashing raise the temp to 77°C (170°F) for 10-15 minutes to mash out, and deactivate the enzymes breaking down the sugars

Step 3 (optional) – Sparging

• if your setup has the capability to sparge then do so with 30L (7.9 gal) sparge water at 78°C (172°F)
• if you are not sparging and using a BIAB (brew in a bag) method then remove grains from mash tun and twist and squeeze the bag to get as much liquid out of the grains as possible
• as you start sparging (or straining your BIAB bag) begin raising the temperature of your wort to a boil

Step 4 – Boiling

• once your wort begins to boil start a timer for a 60-minute boil and add your bittering hops, 28g (1 oz) of Northern Brewer
• at 20 minutes left in the boil add your 2.77 kg (6.1 lb) — reeces peices peanut butter cups
• at 15 minutes left in the boil add 2 whirlfloc tablets (or 1.5g of granulated whirlfloc) and 50g (1.76 oz) each of Fuggles & Northern Brewer
• at Flameout add the 430g (0.95 lb) of PB fit peanut butter powder (it helps to have a seperate bucket to pull out some hot wort to dissolve the powder seperately before adding it all back to the main boil)

Step 5 – Cooling

• After 1 hour of boiling start cooling wort down to yeast pitching temperature
• once you’ve reached yeast pitching temperature take an original gravity reading of your wort

Step 6 – Yeast Pitching

• It is best to make a yeast starter before beginning your brew day (ideally 1 day before) to ensure your yeast are as active and healthy as possible before pitching, but not completely necessary – you could also just rehydrate yeast 30 minutes before pitching.
• Pitch yeast in wort a degree or two higher than the target fermentation temperature to help yeast take off more aggressively 

• To make a yeast starter you can use either:

• DME (dry malt extract) at a ratio of approx. 100g per 1L water (3.5 oz per 33 fluid ounces) for gravity of approx. 1.040 
• some unfermented wort kept cold and sanitary from a previous brew day
• 70g of table sugar per 1L water (2.5 oz per 33 fluid ounces) – however, it is best to use malt sugar (wort / DME) whenever possible to reduce the chance of shocking the yeast with a different food source from starter to wort pitching

• To rehydrate yeast

• Add yeast to approx. 10 times as much room temperature water as the weight of the yeast e.g. 10g yeast in 100 ml water (0.35 oz yeast in 3.5 fluid ounces water)

Step 7 – Fermentation

• Allow yeast to ferment over the next week to two weeks
• If you have a temperature controlled system keep the fermenter temperature to the recommended fermentation temperature for each yeast strain (stated in the yeast ingredients section above)
• Monitor the fermentation activity over the first 7 days by the bubbling of the blow off tube / airlock of your fermenter, as the bubbling slows down (roughly around day 7) take a gravity reading. When the gravity reaches around 1.014 raise the temperature of your fermenter by 1-2 degrees for 2 days for a diacetyl rest (if you don’t have temperature control don’t worry about this step, its not the end of the world!)
• Once the gravity is the same 2 days in a row move onto cold crashing! (If you can’t / don’t want to cold crash go straight to kegging/bottling your beer!)

Step 8 (optional) – Cold crashing 

• begin cold crashing your fermenter (bring the temperature of your fermenter down to as close to 0°C (32°F) as possible, for 2 days to a week depending on how patient you are
• If you don’t have a temp-controlled fermenter, you can cold crash by putting your fermenter in a fridge or temp-controlled chest freezer
• After you have finished cold crashing it's time to keg/bottle your beer! If you are bottling your beer from the fermenter uncarbonated remember to add about 5-7 grams (0.17 - 0.24 oz) of priming sugar to your bottles to carbonate your beer.

‍

‍

‍

‍